MOLYKOTE® Anti-Friction Coatings


View pdf data-sheet

Type Long-lasting AF Coating with excellent resistance to oils and greases. Heat-curing.
Typical applications Dry lubrication of locks, hinges, joints, solenoids etc.
Running-in lubrication for engine and gear parts.
  • Often enables maintenance-free permanent lubrication
  • Low coefficient of friction
  • High pressure resistance
  • Protection against corrosion
  • Good adhesion
  • Applicable in very thin layers
Physical/chemical data
Colour Dark grey
  • Solid lubricants
  • Organic binder
  • Solvent
Service temperature range,°C -70 to +250
Flash point, ISO 1523, °C + 23.5
Curing time, min/°C 60/150
Load carrying capacity, wear protection, service life
Falex-pressure resistance ASTM-D-2625, N p=13600, s=11340
Coefficient of friction
LFW-1, ASTM-D-2714, rotating, n=72 rpm, v=7.9 m/min, no. of revolutions x 1000 to µ=0.1 b = 160, p = 255, s = 250 (2860 N)
Oscillating, frequency=89.5 osc./min, no. of oscillations x 1000 to µ = 0.08 b =95, p =100, s = 210 (900 N)
Surface covering capacity, m2/kg 15
Storage life, years 3
Technical data sheet, no. 71-0154-01
Application method Apply a thin, even film by dipping or spraying onto degreased components. Life can be increased by phosphate or sand blast pre-treatment. Optimum film thickness is 15 µm. Please refer to special literature.
Packages Tin: 500 g
Container: 5 kg
b = bright, p = phosphated, s = sand blasted
Back to Products list