MOLYKOTEŽ Seal and O-ring Greases

1102

View pdf data-sheet

Type High viscosity mineral oil grease with solid lubricants.
Typical applications Gas cocks in industrial pipe lines and domestic appliances.
Properties
  • High water resistance
  • Resistant against diluted acids and many alkalis
  • Excellent oxidation resistance
  • No drop point, hence no melting or run-out
  • DVGW approval
  • Compatible with all domestic gases
Physical/chemical data
Colour Black
Composition
  • Mineral oil
  • Inorganic thickener
  • Solid lubricants
Consistency, density, viscosity
Consistency, NLGI class Approx. 3
Worked penetration, mm/10 205 - 240
Density at 20 °C, g/ml 0.96
Base oil viscosity, mm˛/s 900 (40 °C)
Temperature
Service temperature range,°C 0 to +160, short term to +220
Drop point, °C None
Load carrying capacity, wear protection, service life
Four-ball tester (DN 51350 pt. 4)
Weld load, N 2100
Wear scar under 800 N load, mm 0.85
Almen Wieland machine, OK load, N -
Resistance
Oxidation resistance (DIN 51808), pressure drop 100 h, 99 °C, bar 1.3
Corrosion protection
SKF-Emcor-method (DIN 51802), degree of corrosion 5
Oil separation (DIN 51817), % 0
Storage life, years 5
Technical data sheet, no. 71-0146-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Grease can be used in centralised lubrication systems.
Do not mix with other greases.
Packages Tube: 25 g
Tin: 1 kg
Back to Products list