MOLYKOTEŽ Seal and O-ring Greases


View pdf data-sheet

Type High viscosity silicone grease.
Typical applications Valves and plug cocks on pressure equipments, valves of water softeners, food industry, O-rings in telescopes and LPG loading arms.
  • Wide service temperature range
  • Excellent water resistance
  • Good resistance against mineral oil and most chemicals
  • Compatible with most plastics and elastomers
  • No drop point, hence no melting or run-out
  • British Water Council approval
  • USDA H2 rating
Physical/chemical data
Colour White translucent
  • Polydimethyl siloxane
  • Inorganic thickener
Consistency, density, viscosity
Worked penetration, mm/10 -
Unworked penetration, mm/10 175-210
Density at 20 °C, g/ml 1.0
Base oil viscosity, mm˛/s 8000 (25 °C)
Service temperature range,°C -40 to +200
Drop point, °C None
Load carrying capacity, wear protection, service life
Four-ball tester (DN 51350 pt. 4)
Weld load, N 1300
Wear scar under 800 N load, mm On demand
Oxidation resistance (DIN 51808), pressure drop 100 h, 99 °C, bar 0.1
Corrosion protection
SKF-Emcor-method (DIN 51802), degree of corrosion 2
Oil separation (DIN 51817), % 0.5
Storage life, years 5
Technical data sheet, no. 71-0211-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Do not mix with other greases.
Packages Tube: 100 g
Tin: 1 kg
Containers: 5, 25 kg
Back to Products list