MOLYKOTEŽ Chain and Gear Lubricants



View pdf data-sheet

Type Synthetic grease with solid lubricants for chains and open gears.
Typical applications Steriliser chains, gear drives in furnace and drying systems, sliding contact bearings in dryers and calenders, wire ropes.
  • High pressure resistance
  • Emergency lubrication
  • High wear protection
  • Extremely adhesive
  • Non-melting
  • Resistant against water steam, acids and alkaline solutions
Physical/chemical data
Colour Black
  • Synthetic oil
  • Solid lubricants
  • Inorganic thickener
  • Adhesion improver
Density, viscosity
Unworked penetration, mm/10 250 - 280
Density at 20 °C, g/ml 0.95
Base oil viscosity at 40 °C, mm2/s 1500
Service temperature range,°C 10 to +160
Drop point, °C None
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51350 pt. 4)
Weld load, N 2600
Wear scar, mm 0.9 (600 N)
Almen Wieland machine, OK load, N 18000
Oxidation resistance (DIN 51808), pressure drop 100 h, 99 °C, bar 0.5
Oil separation (DIN 51817), % 0.02
Storage life, years 5
Technical data sheet, no. 71-0241-01
Application method Chains: Fill chain pins with grease, relubricate through grease nippels.
Gears and sliding contacts: Apply grease in the normal way by spatula, brush or grease gun.
Packages Aerosol: 400 ml
Container: 25 kg
Back to Products list