MOLYKOTE® Anti-Friction Coatings

for Plastic and Plastic/Metal Lubrication

3402 C

View pdf data-sheet

Type Heat- and air-curing AF Coating combining excellent corrosion protection and lubrication.
Typical applications Steering and drive mechanisms of aircrafts, threads on main axles of drill hammers, spindles.
Properties
  • Wide service temperature range
  • Combines outstanding lubricity and corrosion protection
  • Strong pressure and wear resistance
Physical/chemical data
Colour Grey
Composition
  • Solid lubricants
  • Organic binder
  • Solvent
  • Corrosion inhibitor
Temperature
Service temperature range,°C -200 to +310
Flash point, ISO 1523, °C +12
Drying time, 20 °C, min 15
Curing time, min/°C 120/20
Load carrying capacity, wear protection, service life
Falex pressure resistance, ASTM-D-2625, N s=10700
Coefficient of friction
LFW-1, ASTM-D-2714
Rotating, n=72 rpm, v=7.9 m/min no. of revolutions x 1000 to µ=0.1 s=45 (2860 N)
Oscillating, frequency = 89.5 osc./min, no. of oscillations x 1000 to µ=0.08 s=25 (900 N)
Resistance
Radiation resistance, rad 108
Surface covering capacity, m˛/kg 15 (aerosol: 1)
Storage life, years 5
Technical data sheet, no. 71-0044-01
Application method Apply a thin, even film by dipping or spraying onto degreased components. Life can be increased by phosphate or sand blast pre-treatment. Optimum film thickness is 15 µm. Cure after evaporation of solvent. Please refer to special literature.
Packages Aerosol: 300 ml
Can: 500 g
Container: 5 kg
b = bright, p = phosphated, s = sand blasted
Back to Products list