MOLYKOTEŽ Bearing Greases


View pdf data-sheet

Type Silicone grease for very high temperature applications at low speeds.
Typical applications Rolling-element bearings in oven conveyors, kiln cars and pumps for molten salts, linkages on turbine speed governors.
  • Low oxidation, hence very suitable for longterm lubrication
  • Non-melting
  • Good resistance against water wash-out
Physical/chemical data
Colour Black
  • Polyphenylmethyl siloxane
  • carbon black
  • corrosion inhibitor
Consistency, density, viscosity
Consistency, NLGI class 2
Worked penetration, mm/10 260 - 300
Density at 20°C, g/ml 1.0
Base oil viscosity, mm˛/s 316 (25 °C)
Service temperature range,°C -18 to +290
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51802 pt.4)
Weld load, N 1500
Wear scar under 800N load, mm On demand
Corrosion protection
SKF-Emcor-method (DIN51802), degree of corrosion 2
Storage life, years 5
Technical data sheet, no. 71-0043-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Greases can be used in centralised lubrication systems.
Do not mix with other greases.
Packages Tube: 100 g
Tin:1 kg
Containers: 5, 25 kg
Back to Products list