MOLYKOTEŽ Seal and O-ring Greases

55 M

View pdf data-sheet

Type Silicone grease.
Typical applications O-rings and seals in pneumatic equipment and pneumatic brakes, fittings and material handling.
  • Low oxidation, hence very suitable for longterm lubrication
  • Wide service temperature range
  • Good water resistance
  • Good corrosion protection
  • Compatible with many plastics and elastomers
Physical/chemical data
Colour Pink
  • Silicone oil
  • Ester
  • Lithium soap
Consistency, density, viscosity
Consistency, NLGI class 2
Worked penetration, mm/10 260 - 300
Density at 20 °C, g/ml 0.96
Base oil viscosity, mm˛/s 100 (25 °C)
Service temperature range,°C -65 to +175
Drop point, °C +205
Load carrying capacity, wear protection, service life
Four-ball tester (DN 51350 pt. 4)
Weld load, N 1300
Wear scar under 800 N load, mm On demand
Oxidation resistance (DIN 51808), pressure drop 100 h, 99 °C, bar 0.1
Corrosion protection
SKF-Emcor-method (DIN 51802), degree of corrosion 0
Oil separation (DIN 51817), % 0.9
Storage life, years 5
Technical data sheet, no. 71-0274-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Grease can be used in centralised lubrication systems.
Do not mix with other greases.
Packages Tube: 100 g
Tin: 1 kg
Container: 25 kg
Back to Products list