MOLYKOTEŽ Bearing Greases

7348

View pdf data-sheet

Type High temperature silicone grease for rolling-element bearings.
Typical applications Bearings in driers and in conveyor chains of wood coating plants, sterilizers.
Properties
  • Low oxidation and evaporation, hence very suitable for longterm lubrication
  • High drop point, hence no risk of melting and running-out
  • High water resistance
  • Good lubricity
Physical/chemical data
Colour Light beige
Composition
  • Polyphenylmethyl
  • Siloxane
  • Lithium complex thickener
  • Antioxidant
  • Solid lubricants
Consistency, density, viscosity
Consistency, NLGI class 2
Worked penetration, mm/10 265 - 295
Density at 20°C, g/ml 1.1
Base oil viscosity, mm˛/s 500 (25 °C)
Service temperature range,°C -20 to +230, short term up to +250
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51802 pt.4)
Weld load, N 1500
Wear scar under 800N load, mm On demand
Corrosion protection
SKF-Emcor-method (DIN51802), degree of corrosion 2 - 3
Storage life, years 5
Technical data sheet, no. 71-0079-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Greases can be used in centralised lubrication systems.
Do not mix with other greases.
Packages Tube: 100 g
Cartridge: 400 g
Tin: 1 kg
Container: 25 kg
Back to Products list