MOLYKOTE® Anti-Friction Coatings

for Plastic and Plastic/Metal Lubrication

7405

View pdf data-sheet

Type Heat curing AF Coating with both good lubricity and corrosion protection.
Typical applications For improved running-in, car door stoppers, small mechanisms of cameras, cylinder head studs, self-cutting screws.
Properties
  • Excellent corrosion protection
  • Low coefficient of friction
  • Good resistance against oils, greases, solvents and many other chemicals
  • High pressure and wear resistance
  • Electrically insulating
Physical/chemical data
Colour Yellowish, transparent
Composition
  • Solid lubricants
  • Organic binder
  • Solvents
Temperature
Service temperature range,°C -70 to +200
Flash point, ISO 1523, °C +43
Curing time, min/°C 60/120
Load carrying capacity, wear protection, service life
Falex pressure resistance, ASTM-D-2625, N b = 8000
Coefficient of friction
LFW-1, ASTM-D-2714 
Rotating, n=72 min-1, v=7.9 m/min no. of revolutions x 1000 to µ=0.1 p=63 (680 N)
Oscillating, frequency = 89.5 osc./min, no. of oscillations x 1000 to µ=0.08 p=4 (900 N)
Corrosion protection
Fretting corrosion (Deyber tester) 36 · 106
Surface covering capacity, m²/kg 16
Storage life, years 5
Technical data sheet, no. 71-0104-01
Application method By spraying, dipping, centrifuging, brushing or printing onto degreased surfaces. Coat as thinly and evenly as possible. Please refer to special literature.
Packages Container: 5 kg
b = bright, p = phosphated, s = sand blasted
Back to Products list