MOLYKOTE® Anti-Friction Coatings

for Plastic and Plastic/Metal Lubrication


View pdf data-sheet

Type Heat curing AF Coating with both good lubricity and exellent corrosion protection.
Typical applications Piston rings and tappets of engines, hinges, brake, lock, pneumatic and hydraulic components, pumps.
  • Excellent lubricity paired with good corrosion protection
  • Strong adherence on all metal surfaces
  • Low coefficient of friction
  • Very good resistance against oils, greases, solvents and many other chemicals
  • Strong pressure and wear resistance
  • Wide service temperature range
Physical/chemical data
Colour Greyish black
  • Solid lubricants
  • Organic binder
  • Solvents
Service temperature range,°C -70 to +380
Flash point, ISO 1523, °C +28
Curing time, min/°C 30/220
Load carrying capacity, wear protection, service life
Falex pressure resistance, ASTM-D-2625, N s=14700
Coefficient of friction
LFW-1, ASTM-D-2714
Rotating, n=72 rpm, v=7.9 m/min no. of revolutions x 1000 to µ=0.1 p=364 (2860 N)
Oscillating, frequency=89.5 osc./min, no. of oscillations x 1000 to µ=0.08 p=214 (900 N)
Radiation resistance, rad 109
Surface covering capacity, m˛/kg 12
Storage life, years 5
Technical data sheet, no. 71-0074-01
Application method By spraying, dipping, centrifuging, brushing or coil coating onto degreased surfaces.
Coat as thinly and evenly as possible. Please refer to special literature.
Packages Can: 500 g
Container: 5 kg
b = bright, p = phosphated, s = sand blasted
Back to Products list