MOLYKOTE® Anti-Friction Coatings

for Plastic and Plastic/Metal Lubrication

D 3484

View pdf data-sheet

Type Heat-curing AF Coating with high flash point solvent, therefore particularly suitable for on-line application.
Typical applications Carburettor springs, clutch shells, inerta seat belt locking mechanisms, lock parts, screws.
  • Combines excellent lubricity with good corrosion protection
  • High flash point
  • High pressure resistance
  • High abrasion resistance, therefore long life
Physical/chemical data
Colour Dark grey
  • Solid lubricants
  • Organic binder
  • Solvent
Service temperature range,°C -70 to +250
Flash point, ISO 1523, °C +23
Curing time, min/°C 10/170
Load carrying capacity, wear protection, service life
Falex pressure resistance, ASTM-D-2625, N p=13600
Coefficient of friction
LFW-1, ASTM-D-2714 
Rotating, n=72 rpm, v=7.9 m/min no. of revolutions to µ=0.1 b=30000, p=300000, s=210000, (2860 N)
Oscillating, frequency=89.5 osc./min, no. of oscillations to µ=0.08 b=15000, p=350000, s=210000 (900 N)
Corrosion protection
Salt spray test, DIN 50021, h 18
Surface covering capacity, m²/kg 10
Storage life, years 5
Technical data sheet, no. 71-0208-01
Application method By spraying, dipping, centrifuging or brushing onto clean and dry surfaces. Coat as thinly and evenly as possible. Please refer to special literature.
Packages Can: 500 g
Containers: 5, 50 kg
b = bright, p = phosphated, s = sand blasted
Back to Products list