MOLYKOTEŽ Bearing Greases

FB 180

View pdf data-sheet

Type Extreme low temperature mineral oil grease containing solid lubricants.
Typical applications Sealed rolling-element and sliding-contact bearings of conveyor systems in coating and drying plants, vulcanising plants; furnaces, fans, motors, calenders, lorry wheel bearings.
Properties
  • Low oxidation and evaporation, hence very suitable for longterm lubrication
  • Non-melting
  • Good resistance against water wash-out
  • Emergency lubrication and protection against wear through incorporated solid lubricants
Physical/chemical data
Colour Black
Composition
  • Mineral oil
  • Inorganic thickener
  • Corrosion inhibitor
  • Solid lubricants
Consistency, density, viscosity
Consistency, NLGI class 2
Worked penetration, mm/10 265 - 295
Density at 20°C, g/ml 0.86
Base oil viscosity, mm˛/s 260 (40 °C)
Service temperature range,°C -30 to +160, short term up to +180
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51802 pt.4)
Weld load, N 2200
Wear scar under 800N load, mm 1.3
Corrosion protection
SKF-Emcor-method (DIN51802), degree of corrosion 0-1
Storage life, years 5
Technical data sheet, no. 71-0164-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Greases can be used in centralised lubrication systems.
Do not mix with other greases.
Packages Tin: 1 kg
Container: 25 kg
Back to Products list