MOLYKOTEŽ Bearing Greases

FS 1292

View pdf data-sheet

Type Extreme pressure, high temperature fluoro-silicone grease.
Typical applications Clutch release bearings in heavy vehicles, bearings and seals in fuel supply systems, visco fan clutch and ventilator bearings.
Properties
  • Low oxidation and evaporation, hence very suitable for longterm lubrication
  • High drop point, hence no risk of melting and running-out
  • Wide temperature range
  • High water and water wash-out resistance
  • Resistant against mineral oil, fuels and many chemicals
  • Compatible with many plastics and elastomers
Physical/chemical data
Colour Whitish
Composition
  • Fluoro-silicone oil
  • Organic thickener
Consistency, density, viscosity
Consistency, NLGI class 1 - 2
Worked penetration, mm/10 280 - 340
Density at 20°C, g/ml 1.28
Base oil viscosity, mm˛/s 1000 (25 °C)
Service temperature range,°C -40 to +200, short term up to +250
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51802 pt.4)
Weld load, N 3400
Wear scar under 800N load, mm 2.4
Corrosion protection
SKF-Emcor-method (DIN51802), degree of corrosion 3
Storage life, years 5
Technical data sheet, no. 71-0165-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Greases can be used in centralised lubrication systems.
Do not mix with other greases.
Packages Tube: 100 g
Tin: 1 kg
Containers: 5, 25 kg
Back to Products list