MOLYKOTEŽ Bearing Greases

FS 3451

View pdf data-sheet

Type Heavy duty, chemically resistant, high temperature fluoro-silicone grease.
Typical applications Seals, rolling-element and sliding-contact bearings of pumps, valves and loading arm joints in chemical and petro-chemical plants.
Properties
  • Low oxidation and evaporation, hence very suitable for longterm lubrication
  • High drop point, hence no risk of melting and running-out
  • Wide temperature range
  • High water and water wash-out resistance
  • Resistant against acids, chlorides and many other chemicals
  • Compatible with many plastics and elastomers
Physical/chemical data
Colour White
Composition
  • Fluoro-silicone oil
  • Chemically inert PTFE thickener
Consistency, density, viscosity
Consistency, NLGI class 2
Worked penetration, mm/10 265 - 295
Density at 20°C, g/ml 1.50
Base oil viscosity, mm˛/s 1000 (25 °C)
Service temperature range,°C -40 to +230, short term up to +260
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51802 pt.4)
Weld load, N 3200
Wear scar under 800N load, mm 2.3
Corrosion protection
SKF-Emcor-method (DIN51802), degree of corrosion 2
Storage life, years 5
Technical data sheet, no. 71-0115-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Greases can be used in centralised lubrication systems.
Do not mix with other greases.
Packages Tube: 100 g
Tin: 1 kg
Back to Products list