MOLYKOTEŽ Seal and O-ring Greases

FS 3452

View pdf data-sheet

Type Chemically resistant fluoro-silicone grease.
Typical applications Valves, cocks and seals in the chemical and petro-chemical industry, bearings in ship loading arm joints.
Properties
  • Extremely low oxidation and evaporation, hence very suitable for longterm lubrication
  • Wide service temperature range
  • Good water resistance
  • Resistant to solvents and most other chemicals
  • Compatible with most plastics and elastomers
Physical/chemical data
Colour White
Composition
  • Fluoro-silicone oil
  • Chemically inert PTFE thickener
Consistency, density, viscosity
Consistency, NLGI class 2 - 3
Worked penetration, mm/10 240 - 280
Density at 20 °C, g/ml 1.47
Base oil viscosity, mm˛/s 10000 (25 °C)
Temperature
Service temperature range,°C -30 to +230
Drop point, °C +220
Load carrying capacity, wear protection, service life
Four-ball tester (DN 51350 pt. 4)
Weld load, N 4400
Wear scar under 800 N load, mm 2.39
Almen Wieland machine, OK load, N 15500
Resistance
Oxidation resistance (DIN 51808), pressure drop 100 h, 99 °C, bar 0
Corrosion protection
SKF-Emcor-method (DIN 51802), degree of corrosion 3
Oil separation (DIN 51817), % 2.8
Storage life, years 5
Technical data sheet, no. 71-0114-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Do not mix with other greases.
Packages Tin: 1 kg
Back to Products list