MOLYKOTEŽ Metal Forming Products

HTP

View pdf data-sheet

Type Solid lubricant paste.
Typical applications Hot forming operations, particularly hot extrusion and drop forging.
Through relevant mix of MOLYKOTE HTF and HTP (depending on materials used) differing forming stages can be achieved.
Properties
  • Wide service temperature range
  • Increases tool life
  • Reduces friction and wear
  • Prevents scoring
Physical/chemical data
Colour White
Composition
  • Mineral oil
  • Solid lubricants
  • Thickener
Density at 20 °C, g/ml 1.5
Temperature
Service temperature range,°C -20 to +1150
Load carrying capacity, wear protection, service life
Four-ball tester
Weld load, DIN 51350 pt. 4, N 2200
Wear scar, DIN 51350 pt. 5, mm 1.1 (800 N)
Almen Wieland machine, OK load, N 20000
Storage life, years 5
Technical data sheet, no. 71-0205-01
Application method Clean tools, then apply paste thinly and evenly with a brush, cloth or swab.
Repeat from time to time as required.
Packages Container: 5 kg
Back to Products list