MOLYKOTEŽ Bearing Greases

Longterm 2 plus

View pdf data-sheet

Type Extreme pressure mineral oil grease containing molybdenum disulphide.
Typical applications High loaded bearings, splines and drive couplings in heavy duty vehicles, tractors, cranes, excavators, bull dozers, conveyors and fork-lift trucks.
Properties
  • Particularly high load carrying capacity
  • Low oxidation, hence very suitable for longterm lubrication
  • Emergency lubrication and wear protection through solid lubricants
  • Protection against scoring
  • Good resistance against water wash-out
  • Particularly adhesive
  • Good corrosion protection
Physical/chemical data
Colour Black
Composition
  • Mineral oil
  • Lithium soap
  • Solid lubricants
  • EP-additive
  • Corrosion inhibitor
  • Adhesion improver
Consistency, density, viscosity
Consistency, NLGI class 2
Worked penetration, mm/10 265 - 295
Density at 20°C, g/ml 0.9
Base oil viscosity, mm˛/s 265
Service temperature range,°C -25 to +110, short-term to +130
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51802 pt.4)
Weld load, N 3800
Wear scar under 800N load, mm 1.0
Speed, DN value, mm/min 250000
Corrosion protection
SKF-Emcor-method (DIN51802), degree of corrosion 0 - 1
Storage life, years 5
Technical data sheet, no. 71-0076-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Greases can be used in centralised lubrication systems.
Packages Cartridge: 400 g
Tin: 1 kg
Containers: 5, 25, 50, kg
Drum: 180 kg
Combi: 24 cartridges plus hand gun
Back to Products list