MOLYKOTEŽ Bearing Greases

Longterm W2

View pdf data-sheet

Type White heavy duty mineral oil greasecontaining solid lubricants for applications where cleanliness is of paramountimportance.
Typical applications Bearings in textile and paper processingmachines, household appliances and optical instruments, food industry (USDAH2 rating).
Properties
  • Good load carrying capacity
  • Low oxidation, hence very suitable for longterm lubrication
  • Emergency lubrication and wear protection through solid lubricants
  • Good resistance against water wash-out
  • Particularly adhesive
  • Good corrosion protection
  • Prevents fretting corrosion
Physical/chemical data
Colour White
Composition
  • Mineral oil
  • Lithium soap
  • Solid lubricants
  • Adhesion improver
Consistency, density, viscosity
Consistency, NLGI class 2
Worked penetration, mm/10 265 - 295
Density at 20°C, g/ml 0.9
Base oil viscosity at 40° C mm2/s 125
Temperature
Service temperature range,°C -30 to +110, short-term to +130
Drop point,°C >=180
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51802 pt.4)
Weld load, N 2400
Wear scar under 800N load, mm 1.4
Speed, DN value, mm/min 450000
Corrosion protection
SKF-Emcor-method (DIN51802), degree of corrosion 0 - 1
Storage life, years 5
Technical data sheet, no. 71-0147-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, greasegun or automatic lubricating system.
Greases can be used in centralised lubrication systems.
Packages Cartridge: 400 g
Tin: 1 kg
Containers: 5, 25, 50, kg
Drum: 180 kg
Back to Products list