MOLYKOTEŽ Chain and Gear Lubricants


M 55 plus

View pdf data-sheet

Type Solid lubricant dispersion in mineral oil.
Typical applications Oil-lubricated friction contacts which need additional lubrication to reduce wear e.g. heavy loaded bearings, sliding guides, spindles and gears.
  • Increases load carrying capacity
  • Reduces friction and wear
  • Noise reduction
  • Improves running-in
  • Emergency lubrication
  • Stops gear pitting
Physical/chemical data
Colour Black
  • Mineral oil
  • Molybdenum disulphide
  • Dispersant
Density, viscosity
Unworked penetration, mm/10 0.91
Base oil viscosity at 40 °C, mm2/s 73,2
Service temperature range,°C Depends on lubricating oil - resp. gear oil used
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51350 pt. 4)
Weld load, N 3000
Wear scar, mm 1.35 (800 N)
Almen Wieland machine, OK load, N 20000
Storage life, years 1
Technical data sheet, no. 71-0149-01
Application method Add 5 % v/v to lubricating and gear oils, 10 % v/v in cases of particular high stress. Usable in all lubrication systems e.g. drop-feed oilers or centralised lubrication systems.
Packages Cans: 1, 5 l
Container: 20 l
Back to Products list