MOLYKOTEŽ Bearing Greases

Multilub
general purpose grease

View pdf data-sheet

Type Universal mineral oil grease without solid lubricants for moderate to high loads.
Typical applications Rolling-element bearings, sliding-contact bearings, sliding guides, linear motion guides, joints, splined shafts, screw spindles.
Properties
  • Good load carrying capacity
  • Low oxidation, hence very suitable for longterm lubrication
  • Protection against scoring
  • Good resistance against water wash-out
  • Good corrosion protection
Physical/chemical data
Colour Yellowish beige
Composition
  • Mineral oil
  • Lithium soap
  • Corrosion inhibitor
  • EP-additive
Consistency, density, viscosity
Consistency, NLGI class 2
Worked penetration, mm/10 265 - 295
Density at 20°C, g/ml 0.87
Base oil viscosity, mm˛/s 114
Service temperature range,°C -25 to +120
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51802 pt.4)
Weld load, N 2200
Wear scar under 800N load, mm 0.8
Speed, DN value, mm/min 450000
Corrosion protection
SKF-Emcor-method (DIN51802), degree of corrosion 1
Storage life, years 5
Technical data sheet, no. 71-0095-01
Application method Clean bearing surfaces.
Apply grease in the normal way using a brush, grease gun or automatic lubricating system.
Greases can be used in centralised lubrication systems.
Packages Tube: 100 g
Cartridge: 400 g
Tin: 1 kg
Containers: 5, 20, 50, kg
Drum: 180 kg
Back to Products list