MOLYKOTEŽ Chain and Gear Lubricants



Type Low viscosity solid lubricant dispersion in mineral oil.
Typical applications Friction contacts, which are not equipped with grease nipples or oil bore-holes. Household appliances, sporting equipment.
  • Good penetration
  • Water repellent
  • High pressure resistance
  • Corrosion protection
Physical/chemical data
Colour Light amber
  • Mineral oil
  • Solid lubricants
  • Corrosion inhibitor
  • Stabiliser
Density, viscosity
Unworked penetration, mm/10 -
Density at 20 °C, g/ml 0.84
Base oil viscosity at 40 °C, mm2/s -
Product viscosity at 40 °C, mm2/s 11.8
Service temperature range,°C -30 to +80
Drop point, °C -
Load carrying capacity, wear protection, service life
Four-ball tester (DIN 51350 pt. 4)
Weld load, N 2900
Wear scar, mm 1.1 (800 N)
Almen Wieland machine, OK load, N On demand
Oxidation resistance (DIN 51808), pressure drop 100 h, 99 °C, bar -
Corrosion protection
SKF-Emcor-method (DIN 51802), degree of corrosion -
Oil separation (DIN 51817), % -
Storage life, years 5
Technical data sheet, no. 71-0173-01
Application method Stir contents or shake aerosol can before use. Apply with a brush, squirt gun, spray can or manual spray device.
Packages Aerosol: 300 ml
Plastic bottle: 500 ml
Can: 5 l
Back to Products list